| From | Message |
DakotaDude360
Dodge Dakota
JOIN HERE
8/27/2009
23:41:16
|
 Subject: Stroker 318 to 390. In a 3.9L??
IP: Logged
Message:
Can I put a 318 to 390 stroker kit in the 98 3.9L?? The 3.9L is just
a sawed off version of the 5.2L. So can i get the kit and just not use
some of the parts or is there a better solution to get more
horsepower and torque. Any answers or suggestions would be
much appreciated.
|
Kowalski
GenIII
8/28/2009
08:28:23
| RE: Stroker 318 to 390. In a 3.9L??
IP: Logged
Message:
Crank will be too long. Without the stroker crank, you don't have a stroker.
Lead, follow, or get out of the way
|
Ben Stevens
Dodge Dakota
JOIN HERE
9/16/2009
22:40:22
| RE: Stroker 318 to 390. In a 3.9L??
IP: Logged
Message:
This guy had a very good point i had a dakota and i thought about this but i didnt have the funds or the ability to try it at the time but couldnt you machine off some of the crank to where it would be the proper size?
|
LOL
Dodge Dakota
JOIN HERE
9/17/2009
00:03:45
| RE: Stroker 318 to 390. In a 3.9L??
IP: Logged
Message:
NOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
|
Kowalski
GenIII
9/17/2009
07:01:41
|  RE: Stroker 318 to 390. In a 3.9L??
IP: Logged
Message:
I don't think it was a good point at all; but if you really think he had a good point - then I guess you should go ahead and try it. Let the other guys know how you make out. Experience is the best teacher for some...
Lead, follow, or get out of the way
|
charlieb37
Dodge Dakota
JOIN HERE
10/01/2009
14:33:00
| RE: Stroker 318 to 390. In a 3.9L??
IP: Logged
Message:
Come on guys I know some of u r not mechanically inclined but seriously are u mentally challenged also the one guy that said machine some off thats just too much I dont mean to be mean but some of you guys should not even be allowed to buy tools good luck though
|
capone
Dodge Dakota
JOIN HERE
10/22/2009
21:33:43
| RE: Stroker 318 to 390. In a 3.9L??
IP: Logged
Message:
Thats a pretty funny idea when you know the details of how an
engine works. I can see where you'd get the idea that it might
work since people always say that the 3.9 is a 5.2 missing two
cylinders, but that wouldn't work. You would be able to use the
same rods and pistons from the stroker kit, but you'd have to find
a crank made specifically for the 3.9. I haven't heard that anyone
makes them. You're better off just building a V8 to put in your
truck.
|
STS
Dodge Dakota
JOIN HERE
10/23/2009
14:09:46
| RE: Stroker 318 to 390. In a 3.9L??
IP: Logged
Message:
a hak saw and a benched grinders will do it
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
