| From | Message |
DakUSA
GenIII
 
5/11/2001
14:35:30
|
 Subject: 3 gauge pods for Gen III
IP: Logged
Message:
Ok everyone, I just got off the phone with Lo-tek about 15 minutes ago. I
> have some final info for all of you that are interested.
> First off the final price for the first batch will be $44.99 in your
choice
> of factory colors. After the first batch is made then the price goes up
for
> factory colors by $5, so basically everyone who preorders is getting free
> color matching.
> Second, before they will make the final production run (A prototype is
> already made) there must be a min of 20 people who will buy, this should
not
> be a problem seeing as how I have received about 15 emails allready and
> Chris May has quite a few as well from what I understand.
> Third, The way this will work is you will send a check or money order to
the
> company and when they have at least 20 they will ship the pods out to you.
I
> had the option of collecting everyones money, but would rather not as I
> would not want to be responsible if I lost it !
>
> Now the first batch can be anywhere from 20 to infinity orders inorder to
> get the free color matching, so If you want one now is the time.
>
> Also he stated that it would take between 4-6 weeks from the time he gets
at
> least 20 people to the time it arrives in your hands, I know it seems
long,
> but hey these are being made from scratch, not just sitting on some shelf
> somewhere.
>
> Last but not least, they will need color samples from the different
> interiors, he said as long as its the size of a quarter or larger it will
> work (just make sure its clean, not sun faded, coke spilt all over it...)
> Cause these will determine the correct colors for everyone elses pods.
> I dont know all the colors, just my gray color, and my brothers r/t is a
> little darker. So if anyone has any broken or spare plastics, let me know.
>
> I will post the companys address in the next writing so you all can send
in
> payment. If there are any questions please email me and I will try to
> answer.
> xtremedsm@hotmail.com
> I think what I will do is once I post the addy they whoever sends out
> payment to the company can send me an email and let me know, and ill keep
> tally of the # of people. I just need a few days buffer zone for the
> questions before the "i sent mine in" emails :)
>
> Sorry to be so long winded,
> Marty
Chris Lambert
Lowered 00 CC Sport 4.7 V-8 5 speed 3.55 LSD 275 HP
|
Bernd
GenIII
5/11/2001
18:38:06
| RE: 3 gauge pods for Gen III
IP: Logged
Message:
I'd be interested Chris. I need to add in my fuel pressure and trans temp eventually.
Currently only have the boost gauge in a single pod on the pillar.
Bernd D. Ratsch
1997 Dodge Dakota SLT
Supercharged V6
|
SLEEPER318
Gen III
5/13/2001
16:07:19
| RE: 3 gauge pods for Gen III
IP: Logged
Message:
ok, i'm intersted, what size gauges will fit? Are they full pillars? Price? Thanks
|
Tyler A
*GenIII*
5/13/2001
19:20:34
| RE: 3 gauge pods for Gen III
IP: Logged
Message:
Count me in. Im sure ill need the gauges to monitor some of the stuff i want to put on over the summer.
Tyler A '00 Dakota Sport-16.532 @ 82mph
|
Hatchbm
Unregistered
JOIN HERE
5/14/2001
19:26:13
| RE: 3 gauge pods for Gen III
IP: Logged
Message:
Yeah, count me in for one!
|
Shawn
Gen III
5/20/2001
20:38:34
|  RE: 3 gauge pods for Gen III
IP: Logged
Message:
I'm in as well.
Shawn
|
MIKE 2
Unregistered
JOIN HERE
5/20/2001
22:49:05
| RE: 3 gauge pods for Gen III
IP: Logged
Message:
I WOULD ALSO LIKE TO ORDER SOON
|
MAD DUC
Gen III
5/22/2001
18:21:36
| RE: 3 gauge pods for Gen III
IP: Logged
Message:
I want one. 2001 dark gray int.
|
SLEEPER318
Dodge Dakota
5/28/2001
17:40:52
|  RE: 3 gauge pods for Gen III
IP: Logged
Message:
What the story on the gauge pods? I haven't heard anything about it in awhile. Are they going to make them? What size gauges???? I'm fixing to buy the dual autometer gauge pod since i haven't heard anything from you guys. Please let us know something. Thanks
|
Shawn
Gen III
6/01/2001
01:57:49
| RE: 3 gauge pods for Gen III
IP: Logged
Message:
Where are we at??? I'm in need of a 3 pod setup pretty soon. What's the word?
Thanks,
Shawn
98 5.2L 4x4 CC
|
Coolva
Dodge Dakota
6/05/2001
22:10:48
| RE: 3 gauge pods for Gen III
IP: Logged
Message:
I want one.. put me down...
|
Shawn
Gen III
6/05/2001
22:38:03
| RE: 3 gauge pods for Gen III
IP: Logged
Message:
Let's light this candle! I need a 3 gauge pod bad, and I would like it to match my interior. Tell me where to ship a piece of sample material too and it's done, Fedex overnight.
Let's go, let's go, let's go,
Shawn
98 5.2L 4x4 CC
|
Bernd
Gen III
6/07/2001
22:23:49
| RE: 3 gauge pods for Gen III
IP: Logged
Message:
Well...sheesh, he becomes a "Daddy" (Congrats) and then abandons us on the 3-Gauge Pillar Buy...hehehehe..... (JUST KIDDING!)
Chris, Let me know when you want to start the purchases...i'm definitely in. My 2-Gauge setup looks good...but need to fit one more: A/F, Fuel Pressure, and Vacuum/Boost. (Decided against the trans-temp for now. Hmmmm...stainless-steel dash with custom gauges...heheheh...nah.)
Hey Shawn,
How do you like the "Tick Tock" operation of the Autometer A/F gauge...looks cool at night eh? ;)
1997 Dodge Dakota SLT - V6
Supercharged @ 10#
|
Horbedarn
Gen I
6/10/2001
01:15:20
| RE: 3 gauge pods for Gen III
IP: Logged
Message:
What is the story on the pod?
2000, CC, SLT, 4x4, 4.7, 3.55, Auto
Exhaust, Air Intake, TBI Spacer
|
Shawn
Gen III
6/14/2001
18:11:00
| RE: 3 gauge pods for Gen III
IP: Logged
Message:
Bernd,
It does look kinda cool;-). Though it's on my 4x4 shift plate for now, which brings me toooooo.....
I recieved an email from LoTek saying they are ready to go, whats the story, should I go direct or are we doing this group bye????? They are ready for production. Lets do it.
Shawn
98 5.2L4x4 CC
PowerDyne @ 10PSI
Gibson Dual Cat Back
JBA Ceramic Headers
And a lot of other goodies
|
Anthony
Dodge Dakota
6/27/2001
17:59:12
|  RE: 3 gauge pods for Gen III
IP: Logged
Message:
Did I miss it? If not, count me in.
'00 5.9 Durango
ATI Intercooled and S/C'd
|
Anthony
Dodge Dakota
7/14/2001
20:55:12
| Triple guage full pillar
IP: Logged
Message:
You can use the hyperlink at the bottom to go directly to their page and preorder yours.
_________________________________________________
Add three critical gauges to your
1997+ Dodge Dakota Truck
Completely replaces OEM pillar.
$39.99
Gauge Size: 2 1/16" or 60MM
Color: Select a ColorBlack - Unpainted
Light Gray +$5.00
Med Gray +$5.00
NOTE: THIS IS A PRE-SALE ITEM.
THIS APPLICATION WILL BE AVAILABLE Aug 2001
http://www.gaugepods.com/dakota.htm
|
John Mullen
Dodge Dakota
7/23/2001
13:57:57
| RE: 3 gauge pods for Gen III
IP: Logged
Message:
I got mine ordered and can't wait.
|
99slt
Dodge Dakota
7/25/2001
19:12:22
| RE: 3 gauge pods for Gen III
IP: Logged
Message:
dumb question but is agate interior considered light or medium gray ??????
|
kicker01
Dodge Dakota
7/27/2001
23:55:21
| RE: 3 gauge pods for Gen III
IP: Logged
Message:
I want to preorder but Im not sure about what size to get for the holders gauge openings- 2 1/16 or 60mm? What size is the most common? And what guages would someone normally put in them besides a boost guage?
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Required
Posting: Registered Users and Administrators only
|
